44,000 Grain Water Softener System
With advanced technology and a range of features, the WHES44 Whirlpool water softener brings best-in-class water softening to households of 1 to 5+ people. Designed to handle up to 140 grains per gallon of hardness, this system will reduce high levels of hardness. Its low salt indicator takes the guesswork out of replacing the salt, and it has a self-cleaning sediment filter. Whirlpool water softeners are also among the most salt-efficient units in the industry. The WHES44’s 6th Sense technology learns your water usage patterns and reduces waste by calculating the amount of salt and water your family needs. That’s less salt to buy, carry, and remember.
- Ideal for households of 1 to 5+ people
- 6th Sense technology learns your water usage patterns over time
- Demand Initiated Regeneration only uses the amount of salt and water you need, saving you money
- Reduces up to 12 ppm high levels of ferrous (clear water) iron
- Fully automatic electronic controls
- Power loss protection retains memory after an outage
- Includes a low salt level indicator
- Ultra high-flow valve connects with up to 1” plumbing
- Installation kit for DIY installations
- Space-saving, single-tank design
- Designed for city and well water applications
Family Size: 1 – 5+ people
Maximum Grain Capacity: 44,000
Salt Storage Capacity: 200 lbs.
Warranty:
The warranty on this unit is for 1 year on full parts and labor*, 3 years on the electronics, and 10 years on the tank.
*This unit’s 1-year full parts and labor warranty may be extended up to 5 years with use of Whirlpool Water Softener Cleanser (WHEC-WSC).
Product Attributes
- Rated Softening Capacity (Grains @ Salt Dose): 13,000 @ 2.6 lbs.; 34,800 @ 9.7 lbs.; 44,000 @ 16.7 lbs
- Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose): 5,060 @ 2.6 lbs.
- Water Used During Regeneration @ Minimum Salt Dose: 2.68 gal. / 1,000 grains
- Total Water Used Per Regeneration @ Maximum Salt Dose: 43.2 gallons
- Rated Service Flow Rate: 9.0 gpm
- Amount of High Capacity Ion Exchange Resin: 1.23 cu. ft.
- Pressure Drop at Rated Service Flow: 9.4 psig
- Water Supply Max. Hardness: 140 gpg
- Water Supply Max. Clear Water Iron: 12 ppm*
- Water Pressure Limits (minimum / maximum): 20 – 125 psi**
- Water Temperature Limits (minimum / maximum): 40 – 120 °F
- Minimum Water Supply Flow Rate: 3 gpm
- Intermittent Flow @: 18.7 gpm***
- Maximum Drain Flow Rate: 1.8 gpm
- Salt Storage Capacity: 200 lbs.
*Capacity to reduce clear water iron is substantiated by laboratory test data. State of Wisconsin requires additional treatment if water supply contains clear water iron exceeding 5 ppm.
**Canada working pressure limits: 1.4 – 7.0 kg/cm2.
***Intermittent flow rate does not represent the maximum service flow rate used for determining the softener’s rated capacity and efficiency. Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
These systems conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data.
| Depth | 20 1/2 in. |
| Width | 15 in. |
| Height | 48 in. |
Electrical Requirements
Transformer Included.
Installation and Operation Manual
View HereEliminate Hard Water Effects with a Whirlpool Water Softener
Extend your warranty to 5 years with cleanser purchase
Extend Warranty
Sign up for scheduled reminders to add cleanser
Remind MeThe Easy Way To Learn What’s in Your Water
Check your water quality before committing to a treatment system. Order a free test strip to get started.
Request a Test Strip